Set The Answer Delay; Set The Maximum Message Length - BT BT4500 Quick Setup And User Manual

Set the answer delay

1. Select ,
Menu
2. Press until
press .
OK
3. Press or
or
Answer only
4.
Answer delay
or to display the number of rings you want
(2-10 rings or Time saver) and press
be displayed.

Set the maximum message length

You can set the maximum length that an answer
machine message can be: 1 minute, 2 minutes or 3
minutes. The default setting is 3 minutes.
1. Select ,
Menu
2. Press until
press .
OK
3.
Answer and record
4. Press to display
press . Press
OK
want and press
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
1666 BT4500 UG [5].indd 43
is displayed, press
Answer Phone
is displayed,
Answer settings
to display either
Answer & record
and press .
OK
is displayed, press
OK
is displayed, press
Answer Phone
is displayed,
Answer settings
is displayed, press
Maximum msg length
or to select the length you
. will be displayed.
OK Saved
Time saver
When you ring in to access your
.
OK
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after 10
seconds. If you don't have new
messages it will answer after
20 seconds. This means you
. Press
can hang up knowing that you
have no new messages, saving
. will
OK Saved you the time and the cost of
the call.
For compatibility with BT 1571
(or another voicemail service)
Make sure the answer delay is
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
.
delay should be less than on
OK
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
.
OK
and
Answer machine 43
09/04/2013 15:04