Set The Answer Mode (Answer & Record Or Answer Only); Set The Answer Delay - BT BT3440 Quick Setup And User Manual

Answer Machine
Set the answer mode (Answer &
Record or Answer Only)
1. Follow steps 1 to 2 in 'Record
your own outgoing message' on
page 29.
2. ANSWER MODE is displayed,
press .
3. Press or
outgoing message mode you
ANS & REC or ANSWER
ONLY and press

Set the answer delay

The answer delay setting sets how
many times the phone will ring
before the answer machine takes the
call. You can choose from 2-8 rings
or Time saver. The default setting is
4 rings.
1. Press , ANS. MACHINE is
displayed, press
2. Press until TAM SETTINGS is
displayed, press
3. Press to display ANSWER
DELAY and press
4. Press or
number of rings you want (2–8 rings
or Time saver) and press
your new setting.
30
to display the
. You will hear a
.
.
.
to display the
to save
Time saver
When you ring in to access
your answer machine
remotely, if you have set Time
saver as the answer delay
and you have new messages
it will answer after 4 rings. If
you don't have new messages
it will answer after 6 rings.
This means you can hang up
knowing that you have no
new messages, saving you the
time and the cost of the call.
For compatibility with
BT 1571 (or another
voicemail service)
Make sure the answer
delay is set for your answer
machine to answer before
the voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.