Channel Menu; Select Antenna / Cable; Scan Channels - JVC EM42FTR User Manual

Channel Menu

Select Antenna / Cable

Select Antenna or Cable for the service connected to your TV.
1
Press MENU.
2
to select "Channel", then press or OK.
Press or
3
to select "TV Mode", then press or OK.
Press or
4
to select "Antenna" or "Cable", then press OK.
Press or

Scan Channels

Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly. See page 14.
1
Press MENU.
2
to select "Auto Channel Scan", then press or OK.
Press or
3
to select "Start Scan", then press OK.
Press or
Scanning progress is displayed on the menu screen. To stop scanning, select "Stop Scan" and press
OK.
Note: Auto scan may take 15 to 30 minutes to find available channels.
30
Audio
Adjusting the Menu Settings
Setup
PIP
TV Mode
Closed Caption
Auto Channel Scan
Partial Channel Scan
Wide
Find Channel
Channel Management
Channel
Digital MTS
Cable
English