Selecting The Input Source; Channel Selection; Listening To The Radio (Radio Mode); Display Channel Information - JVC LT-48C540 Instruction Manual

Initial Setup
4

Selecting the Input Source

1. Press the
button on the right side panel of the TV or the
INPUT button on the remote control to display the Input source
list.
2. Press the
buttons to select the input source that you want:
DTV / CADTV (for Ireland only) / ATV / SCART / YPbPr / PC /
HDMI1 / HDMI2 / HDMI3 / AV / USB.
3. Press the OK button to confirm your selection. If you do not press
the OK button to confirm, the TV will automatically confirm the
selected input source within 4 seconds.
Alternative
Press the TV.RD button to switch to TV / digital radio
channels directly.

Channel Selection

• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
•
channel will then be unlocked (refer to page 42 for details on Block Channel).
Press the FAV button to view the Favourite List. Then use the
•
button to view the selected channel (refer to page 27 for details on Channel Edit).
• Press the button to return to the previously viewed channel.

Listening to the Radio (Radio Mode)

In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
•
Press the CH
•
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to listen to the selected station.
Press the GUIDE button to see all the stations in the Programme Guide (refer to page 44 for details on EPG).
•

Display Channel Information

• Press the i button to view the current information.

Volume Adjustment

• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
listening.
24
/ buttons on the remote control repeatedly to change the radio stations.
buttons to highlight and select the channel.
buttons to highlight and select the channel. Press the OK
buttons to highlight and select the station.
button again or the VOL + button to resume audio
button. Press the
Input Source
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
HDMI3
AV
USB
OK
(for UK)
Input Source
DTV
CADTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
HDMI3
AV
USB
OK
(for Ireland)