Introduction; Playable Ipod Models; Auto Power Save Function; Important Cautions - Kenwood C-BX3 Instruction Manual

Introduction

Auto power save function

When no operation is done in certain situations for 29 minutes, the
unit turns off automatically. This function is on at the initial setting.
For details, refer to "Operations."
In this manual, the remote control buttons are used for explaining
the operations unless mentioned otherwise. However, if the System
has the same or similar button names, they can also be used for the
operations.

Playable iPod models

•
Compatible iPod:
Made for
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch
iPod classic
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
*
1
Only for still picture
•
Also refer to the instruction manual for iPod.
• If incompatible iPod is connected, NOT SUPPORT scrolls on the
display, then NO SUPP appears.
• If iPod does not play correctly, update iPod software to the latest
version.
•
For details about updating iPod, check on the Apple web site
<http://www.apple.com/>.
•
For the latest information on compatible iPod models, check on our
web site.
In this manual, "iPod" refers to iPod, iPod touch and iPhone devices.
When iPod touch or iPhone device is referred to directly, "iPod
touch" or "iPhone" is used.
4
C-BX3
Audio Video
*
1
–

Notes on handling

Important cautions

Installation of the System
•
Select a place which is level, dry, and neither too hot nor too cold;
between 5°C and 35°C.
• Do not use the System in a location near heat sources, or in a place
subject to direct sunlight, excessive dust, or vibration.
• Install the System in a location with adequate ventilation to prevent
internal heat buildup.
Power cord
•
Do not handle the power cord with wet hands.
• A small amount of power is always consumed while the power cord is
connected to the wall outlet.
• Do not pull on the cord to unplug the power cord. When unplugging
the power cord, always grasp and pull the plug so as not to damage
the cord.
To prevent malfunctions of the System
• There are no user-serviceable parts inside. If anything goes wrong,
unplug the power cord and consult your dealer.
•
Do not insert any metallic objects or liquids into the System.

Safety precautions

Avoid malfunction and/or injury
•
Do not let children climb up or let anyone sit on top the System.
•
Do not place anything heavier than 20 kg on top of the System.
Avoid moisture, water, and dust
Do not place the System in moist or dusty places.
Avoid high temperatures
Do not expose the System to direct sunlight and do not place it near any
heating devices.
When you are away
When away on holiday or for other reasons for an extended period of
time, disconnect the power cord from the wall outlet.
Do not block the vents
Blocking the vents may damage the System.
Care of the glass top
•
Use only cleaning materials which are free of grit and debris to avoid
scratching and marking of the glass surface.
• Use only detergents and cleaning solutions which are recommended
for cleaning glass should be used.
Care of the cabinet
• Stains on the System should be wiped off with a soft cloth. If the
System is heavily stained, wipe it with a cloth soaked in water diluted
neutral detergent and wrung well, then wipe clean with a dry cloth.