Starting A Warm Engine - Husqvarna 129DJx Operator's Manual

STARTING AND STOPPING
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.

Starting a warm engine

Primer bulb: Press the air purge repeatedly until fuel
begins to fill the bulb (about 10 times). The bulb need not
be completely filled.
Repeat pulling the cord until engine attemps to start (or
maximum 3 pulls).
Stopping
Stop the engine by switching off the ignition.
CAUTION! The stop switch automatically returns to the
start position. In order to prevent unintentional starting,
the spark plug cap must be removed from the spark plug
when assembling, checking and/or performing
maintenance.
–
English 17