BT Quartet 1100 User Manual page 19

Quartet 1100 User Guide – Edition 4 – 7.8.00
To re-register an additional
handset
Before re-registering, the
old registration code must
first be erased. Once erased
you can re-register your
additional handset by
following the registration
process on p18.
To erase a registration
code
Press the QUICKDIAL
button
Press the CHANNEL
button.
You will hear a tone.
Press the
Press the QUICKDIAL
button.
You will hear a confirmation
tone.
Your old registration code
is now erased and you can
re-register your additional
handset following the
procedure opposite.
19
button 4 times.
Note
Check that your additional handset
is registered correctly by pressing
the TALK button and listening for
a dial tone. If you do not hear a
dial tone your additional handset
is either out of range of the base
unit or it has not been registered
properly, or the base unit line cord
is not plugged in.
To set the handset number
Each additional handset
must be assigned an identity
number (2, 3 or 4). Your
Quartet 1100 handset is
already registered as
HANDSET 1. A Quartet
additional handset is pre-set
as HANDSET 2. However,
further additional handsets
can be numbered as they are
added.
Press the QUICKDIAL
button.
Press the SECRECY button.
Secrecy
Enter the handset number
2 - 4
between (2 and 4).
Press the QUICKDIAL
button. You will hear a beep
confirming that the new
number has been stored.