Table of Contents
Advertisement
Different devices implement the RS-232 standard in different ways.
If you are having problems with a serial device, be sure to check
the pin assignments for the connector. The following table shows
the pin assignments for the card's RS-232 port:
Pin no.
1
2
3
4
5
6
7
8
9
If the SBC-350A is installed into an enclosure, an external speaker
can be connected to CN13.
Pin no.
Signal
1
+5 V
2
Speaker out
3
Speaker out
4
Speaker out
Now that you have made all the required external connections, you
can close up your chassis (as described in Chapter 2). If you are
installing any other cards, do it now. You can then power up your
system as described in the next chapter.
Signal
DCD
RX
TX
DTR
GND
DSR
RTS
CTS
RI
Chapter 3 Connecting peripherals
21
Advertisement
Table of Contents
