Table of Contents
Advertisement
AUTOREPEAT RECORDING
Autorepeat Recording
The same tape can be recorded over many times.
1
Press the AUDIO ON/MENU button until the (SET
UP 3) menu is displayed.
°
The "ALARM MODE" setting is flashing.
ALARM MODE
ALARM SPEED
ALARM DURATION
TAPE IN MODE
TAPE END MODE
TAPE END OUT
CLOG DETECT.
GB
2
Press the ] button, until the "TAPE END MODE"
setting is flashing.
3
Press the l (or j) button to set to "R 1" or "R 2".
(See "Setting the Mode at the End of the Tape")
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
°
The REPEAT LED will light.
The setting procedure is now completed.
°
5
Press the REC button.
°
Recording will start. When the tape end is
reached, the VCR will rewind it to the
beginning, and recording will resume.
NOTES:
•
If during autorepeat recording there is an alarm
trigger, "AL" is displayed on the digital display and
alarm recording will take place. (Please refer to page
14, "ALARM RECORDING".)
•
If the "TAPE END MODE" setting is R 1, the REPEAT
LED will go off if there is an alarm trigger. The
recording will continue to the end of the tape then it
will be rewound to the beginning and stop. "OFF" will
be displayed on the digital display.
English
<SET UP 3>
Y1
3H
20S
STOP
REW
-3M
Y
Setting the Mode at the End of the Tape
In the (SET UP 3) menu, you can set the mode of the
VCR mode when the tape reaches the end during
recording.
1
Press the AUDIO ON/MENU button until the (SET
UP 3) menu is displayed.
ALARM MODE
ALARM SPEED
ALARM DURATION
TAPE IN MODE
TAPE END MODE
TAPE END OUT
CLOG DETECT.
2
Press the ] button, until the "TAPE END MODE"
setting is flashing.
3
Press the l (or j) button, to set the desired mode.
REW. . . . . . . . . . . Rewinds the tape to the
STOP . . . . . . . . . . Goes to stop mode
EJECT . . . . . . . . . The cassette is ejected
R1. . . . . . . . . . . . . The autorepeat mode is
R2. . . . . . . . . . . . . Autorepeat mode is active
4
Press the PAUSE/SCAN button to save the setting
13
<SET UP 3>
Y1
3H
20S
STOP
REW
-3M
Y
beginning, then goes to stop
mode
automatically canceled if
there was an alarm trigger
even if there was an alarm
trigger
Advertisement
Table of Contents
