Brightness Control - Honda Civic Owner's Manual

Brightness Control

Control Knob
On information display
* Not available on all models
When the parking lights are turned on and the
ignition switch is in ON *1 , you can use the
( w
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. The
information display * /i-MID * will return to its
original state several seconds after you adjust
the brightness.
■
Brightness level indicator
The brightness level is shown on the
information display * /i-MID * while you are
adjusting it.
*1: Models with the smart entry system have an
ENGINE START/STOP button instead of an ignition
switch.
uuOperating the Switches Around the Steering WheeluBrightness Control
1Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the
(display/information) button
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
(Select/Reset) knob or the
* switches the display.
141