Honda Civic Owner's Manual page 389

Rear License Plate Light Bulbs
When replacing, use the following bulbs.
Rear License Plate Light: 5 W
Lining
Fastener
Clip
Bulb
Socket
Models with trunk lid lining
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
All models
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
uuReplacing Light BulbsuRear License Plate Light Bulbs
387