Pc Connection - Orion TV19PL120DVD Instruction Manual

PC Connection

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Use a PC-VGA lead (not supplied) to connect your PC to this unit. Plug the lead
carefully not to break or bend the contact inside of plug.
TV
(Back side view)
PC/HDMI
HDMI PC MONITOR
AUDIO
to AUDIO 1
input
Audio lead (not supplied)
Select PC input
Press INPUT SELECT and press C C C C C or D D D D D to select
PC, then press ENTER. PC appears on the TV
screen.
Note:
• If there is no video signal from the computer when the unit is in PC mode,
'NO SIGNAL' will appear on the TV-screen.
• See next page for PC mode menu.
Monitor Display modes
MODE Resolution
VGA 640x480
VGA 720x400
SVGA 800x600
XGA 1024x768
WXGA 1280x720
WXGA 1280x768
WXGA 1360x768
(according to Graphic card)
50A0201A_p04-09.p65
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
VGA lead
(not supplied)
Refresh rate
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
7
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PC
2 +
9/12/07, 4:54 PM
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PCs are usually sup-
plied with a 'normal'
CRT monitor (Cathode
Ray Tube).
Before you connect this
unit to your PC, change
the adjustment of your
PC's graphic card.
Otherwise the picture
may not appear cor-
rectly on the unit. Turn
on your PC (still with
your old Monitor) and
select under 1360 x
768 for on-screen
graphic resolution.
Select under 60 Hz for
on-screen refresh rate.
Switch off your PC,
then connect it to this
unit while both items
are still switched off.
Note:
• Digital PC-connection via
HDMI input is not supported.
If you try to connect your PC
digitally anyway, the TV-
operation might freeze. TV
will stop to respond prop-
erly on usercommands.
Countermeasure:
Switch-off your TV and
disconnect from the
220~240V-power-supply.
Disconnect the digital PC-
connection.
Now you may retry operat-
ing your TV.
• If a digital PC-connection
does show a picture, proper
working is not guaranteed.
Digital PCconnection is not
granted for this TV.
7