Playing A Disc - Orion TV19PL120DVD Instruction Manual

Playing a disc

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so
may cause serious personal injury.
Basic playback (DVD/VCD/Audio CD)
Preparation
Make sure that the POWER (
indicator lights up.)
1
Press TV/DVD on the remote control to select the DVD mode, or press INPUT
SELECT and press ▲ or ▼ to select DVD, then press ENTER.
2
Place the disc in the disc slot with the label side
facing forward. (If the disc has a label.)
Hold the disc without touching either of its surfaces,
align it with the guides, and place it in position.
• DO NOT FORCE THE DISC, THIS CAN
DAMAGE THE MECHANISM, LIGHTLY PUSH THE
DISC UNTIL IT IS ACCEPTED.
3
On the TV-screen, " " changes to
"Reading" and then playback
commences.
• A menu screen will appear on the
TV screen if the disc has a menu
feature.
• Press ▲/▼/
B A
/ to select title, then press ENTER.
Title is selected and play commences.
4
Press to end playback.
• The unit records the stopped point, depending on the disc. " " appears on
the screen. Press PLAY ( ) to resume playback (from the scene point).
• If you press again ("
stopped point.
To start playback in the stop mode
Press PLAY ( ).
Note:
• If the unit does not operate property:
Static electricity, etc., may affect the player's operation.
Disconnect the AC power cord once, then connect it again.
50A0201A_p32-37.p65
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
) switch on the top of the unit is pushed in (ON). (The STANDBY
" appears on the screen.), the unit will clear the
33
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Reading
9/12/07, 4:58 PM
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
33