Manual Scan; Carrier Setup - Orion TV19PL120DVD Instruction Manual

Manual Scan/Carrier Setup
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Manual Scan

1
Press DIGITAL MENU, the menu will appear on the
screen.
Press B or A to select Installation option.
Press C or D to select 'Manual Scan' from the sub
menu tab, then press ENTER.
2
You can choose the carrier number from the Channel
list by using B or A and the corresponding frequency
set for the carrier will be set for tuning.
Otherwise you can also directly enter the frequency value to start the tuning.
3
After setting the carrier, press ENTER to start the scanning. During the scan process, the
list of services (TV/Radio) collected for the carrier will be listed.
On completion, 'Scan completed' message will be shown.
4
Then the confirmation banner will be displayed.
Press B or A to select 'Yes' or 'No', then press ENTER.
5
Press EXIT to return to the normal screen.

Carrier Setup

1
Press DIGITAL MENU, the menu will appear on the screen.
Press B or A to select Installation option.
Press C or D to select 'Carrier Setup' from the sub menu tab,
then press ENTER.
2
All the carriers are listed with their frequency and service information - the user can scroll
through the carrier list and select each one individually to Rename, Delete or Rescan.
3
Rename:
Select carrier, then press Red button. The alphanumeric keypad will appear. You can
rename a service as per your preference.
Delete:
Select carrier, then press Green button. The check mark (
selected carrier. Then press ENTER. The confirmation banner will be displayed.
Press B or A to select 'Yes' or 'No', then press ENTER. If the option 'Yes' is selected then
all the marked carriers will be deleted from the list.
Rescan:
Rescan allows to tune the already tuned carrier, to collect any new programmes that are
currently available in the stream. Press Blue button, to rescan the current selected carrier.
50A0201A_p20-23.p65
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Main menu
A C A C
B B
Manual Scan
Main menu
A C A C
B B
21
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation
Auto Scan
Manual Scan
Carrier Setup
Navigate 0..9 Enter Exit
Installation
Auto Scan
Manual Scan
Carrier Setup
) will be displayed for
9/12/07, 4:56 PM
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
With the Manual Scan
option, you can tune
one carrier at a time,
by entering the carrier
parameters manually.
The Carrier setup option
menu lists all the carri-
ers (multiplexes) that
are currently available
and allows you to re-
name, Delete or Rescan
carriers individually.
WE STRONGLY SUGGEST
YOU NEVER DELETE ANY
OF THE CARRIER INFOR-
MATION UNLESS IN-
STRUCTED TO DO SO.
Note:
• If on the 'AUTO INSTALLA-
TION (COUNTRY)' screen
'FINLAND' is selected,
"Frequency (kHz)" cannot
be used.
21