Marking Desired Scenes - Orion TV19PL120DVD Instruction Manual

Marking desired scenes

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Marking the scenes (DVD/VCD/Audio CD)
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼.
Then press ENTER at the desired scene.
• Repeat this procedure to set the other 2 scenes.
3
Press MARKER to clear this display.
Returning to the scenes (DVD/VCD/Audio
CD
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
3
Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
50A0201A_p32-37.p65
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Marker 1
Marker 2
Marker 3
Marker 1
Marker 2
Marker 3
Marker 1
Marker 2
Marker 3
Marker 1
Marker 2
Marker 3
37
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
00 27 54
00 27 54
01 16 25
02
08 31
00 27 54
01 16 25
02
08 31
9/12/07, 4:58 PM
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Note:
• Some discs may not work
with the marking operation.
• The marking is cancelled
when you eject the disc or
turn the power off.
• Some subtitles recorded
around the marker may fail
to appear.
• In case of Video CD with
PBC, Marker function is
prohibited.
• Marker function does not
work with MP3/JPEG CD.
37