Operating Your Radio - Dab - Sangean DCR-9 Operating Instruction

Operating your radio - DAB

1. Fully extend the telescopic aerial.
2. Press the StandBy button to switch on your radio.
3. If this is the first time the radio is used a quick scan DAB channels
will be carried out. The display will show "Autotune Quick scan".
If the radio has been used before the last used station will be
selected.
4. During Autotune as each group of stations is detected the bottom
line of the display will show its name and the station count will be
updated. The top line of the display shows a bargraph indicating
progress of the Autotune.
5. When the Auto tune is complete the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune your radio will display
"No Signal".
7. If no signals are found it may be necessary to relocate your radio
to as position giving better reception.
GB
6