Cleaning The Door - Electrolux EBGL70 User Manual

Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
STEAM GENERATION SYSTEM
CAUTION!
Dry the steam generator after
each use. Soak up water with the
sponge.
Remove the limescale residue with
water and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel. Fol-
low the instructions of the manu-
facturer.

CLEANING THE DOOR

2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
Cleaning the water drawer and the
steam generator:
1. Put the water and vinegar mixture (ap-
proximately 250 ml) through the wa-
ter drawer into the steam generator.
Wait for approximately 10 minutes.
2. Remove the water and vinegar with the
sponge.
3.
Put clean water (100 - 200 ml) into the
water drawer to flush the steam gener-
ation system.
4. Remove water from the steam genera-
tor with the sponge and rub dry.
5. Keep the door open to let the appli-
ance dry fully.
To clean the door remove it.
ENGLISH 23