Installing The Idrac Ports Card - Dell PowerEdge R520 Owner's Manual

Figure 34. Removing and Installing the iDRAC Ports Card
1. expansion-card riser 1
2. iDRAC Ports card
3. iDRAC Ports card alignment slot

Installing The iDRAC Ports Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Unpack the iDRAC Ports card and prepare it for installation.
For instructions, see the documentation accompanying the card.
2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
3. Open the system.
4. Locate the iDRAC Ports card connector on expansion-card riser 1.
5. Open the expansion-card latch and remove the filler bracket.
67