Dell PowerEdge R520 Owner's Manual page 133

Error Code Message Information
PSU0006
Message
LCD Message
Details
Action
PSU0016
Message
LCD Message
Details
Action
PSU0031
Message
LCD Message
Details
Action
PSU0032
Message
Details
Action
PSU0033
Message
LCD Message
Details
Action
number > type mismatch.
Power supply <
Power supply < number > is incorrectly configured. Check PSU.
Power supplies should be of the same input type and power rating.
Install matched power supplies and review proper configuration in
this manual.
number > is absent.
Power supply <
number > is absent. Check PSU.
PSU <
The power supply has been removed or has failed.
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see
Cannot communicate with power supply <
Cannot communicate with PSU <
The power supply may operate, however power supply monitoring is
degraded. System performance may be degraded.
Remove and reinstall the power supply. If the issue persists, see
Getting Help.
The temperature for power supply <
System performance may be degraded.
Check the system operating environment, including airflow and inlet
temperature. Check system logs for temperature and thermal
component failures.
The temperature for power supply <
allowable range.
number > temperature outside of range. Check PSU.
PSU <
System performance may be degraded.
Check the system operating environment, including airflow and inlet
temperature. Check system logs for temperature and thermal
component failures.
Getting Help.
number >.
number >. Re-seat PSU.
number > is in a warning range.
number > is outside of the
133