Dell M6700 P22F Owner's Manual page 63

Option
Parallel Port
Serial Port
SATA Operation
Drives
SMART Reporting
Description
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
Allows you to define and set how the parallel
port on the docking station operates. You can
set the parallel port to:
• Disabled
• AT
• PS2
• ECP
Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may allocate
resources even if the setting is disabled.
Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI
• RAID On (Default Setting)
NOTE: SATA is configured to support
RAID mode.
Allows you to configure the SATA drives on
board. The options are:
• SATA-0
• SATA-1
• SATA-3
• SATA-4
• SATA-5
Default Setting: All drives are enabled.
This field controls if the hard drive errors for
the integrated drives are reported during
system startup. This technology is part of the
SMART (Self Monitoring Analysis and
Reporting Technology) specification.
63