Using The Self-Timer; Configuring File Settings - HP Photosmart Mobile Camera User Manual

Using the Self-Timer

The Self-Timer allows you to set a short delay before a picture is
snapped. Use this feature when you want to be in your own
pictures. To set the timer:
1. Tap File > Menu > Setup tab.
2. Select Self-Timer from the list, then tap Change.
3. Select a delay of either 2 or10 seconds by selecting the
corresponding option on the menu.
4. Tap OK to exit the Settings menu.
To cancel the timer:
1. Tap File > Menu > Setup tab.
2. Select Self-Timer from the list, then tap Change.
3. Select Off.
4. Tap OK to exit the Settings menu.

Configuring File Settings

The settings menu on the Photosmart mobile camera allows you
to specify how images are named and stored on your iPAQ
Pocket PC. Using the File > Menu settings, you can change the
filename prefix of images you capture and adjust the image
counter. Additionally, you can specify the folder on your iPAQ
Pocket PC where images are stored. To access the file settings
menu:
1. Tap File > Menu > File tab.
2. Make the desired changes to the file configuration.
3. Tap OK to exit the Settings menu.
User's Guide
Using the Camera Settings
3–4