Cisco Nexus 2000 Series Hardware Installation Manual page 66

Cisco Nexus 2248TP-E FEX
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Figure 2-10
5
1
Receive optical bore
2 Transmit optical bore
3 Clasp shown in closed position
Figure 2-11
connections. For the cable specifications that apply to these transceivers, see the
Transceiver Specifications" section on page
Figure 2-11
Figure 2-12
connections.
Cisco Nexus 2000 Series Hardware Installation Guide
2-10
SFP+ Optical Transceivers and FETs
1 2
3
4
identifies the major features of the SFP+ copper transceiver and cable used for uplink
SFP+ Copper Transceiver Module
identifies the major features of RJ-45 connectors, which are used for the downlink
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
4
Clasp shown in open position
5 Dust plug (use this to protect the bores from dust
contamination when the optical cables are removed)
B-7.
"SFP+ Copper
OL-19013-05