Transceiver Specifications; Sfp+ Optical Transceiver Specifications - Cisco Nexus 2000 Series Hardware Installation Manual

Transceiver Specifications

1. Dimensions are presented for only the chassis rack size and service clearance requirements.
2. Combine the chassis, power supply, and fan tray weights for the overall weight of the switch to be installed. Remember to
Transceiver Specifications
This section describes the transceiver specifications for the Cisco Nexus 2000 Series FEX. This section
includes the following topics:
•

SFP+ Optical Transceiver Specifications

This section provides the general and environmental specifications for the SFP+ transceivers used with
optical cables.
For the general specifications that apply to SFP+ transceivers, see
specifications, see
Table B-4 SFP+ Transceiver General Specifications
Transceiver Cable Type Connector Type
N2200 FET MMF
SFP-10G-SR MMF
SFP-10G-LR SMF
Table B-5
Parameter
Storage temperature
Case temperature
Relative humidity
Module supply voltage
1. Absolute maximum ratings are those values beyond which damage to
Cisco Nexus 2000 Series Hardware Installation Guide
B-6
double the power supply weights if there are two power supplies installed in the FEX.
SFP+ Optical Transceiver Specifications, page B-6
Table B-5.
Wavelength (nm)
Dual LC/PC 850
Dual LC/PC 850
Dual LC/PC 1310
Environmental and Power Specifications for the 10-Gbps SFP+ Optical Transceivers
1
Specification
–40 to 185°F (–40 to 85°C)
2
32 to 158°F (0 to 70°C)
5 to 95%
3.1 to 3.5 V
the device may occur if these limits are exceeded for other than a short
period of time.
Appendix B
Table
Core Size Modal Bandwidth
(microns) (MHz-km)
50 500
50 2000
62.5 160
62.5 200
50.0 400
50.0 500
50.0 2000
G.652 fiber —
Technical Specifications
B-4. For the environmental
Maximum Cable
Distance
82 feet (25 meters)
328 feet (100 meters)
85 feet (26 meters)
108 feet (33 meters)
216 feet (66 meters)
269 feet (82 meters)
984 feet (984 meters)
6.2 miles (10 km)
OL-19013-05