Using The Configuration Wizard To Configure The Controller; Preparing The Wireless Lan Controller For Operation - Cisco Catalyst 3750G Getting Started Manual

5

Preparing the Wireless LAN Controller for Operation

Follow these major steps to prepare the integrated wireless LAN controller for operation.

• Using the Configuration Wizard to Configure the Controller

• Logging into the Controller
• Verifying Interface Settings and Port Operation
• Connecting Access Points
Using the Configuration Wizard to Configure the Controller
Follow these steps to use the Configuration Wizard to configure the controller for basic operation:
Get the initial configuration parameter settings for the controller from your wireless LAN
Step 1
planner.
Launch a web browser on your PC.
Step 2
Step 3 If you have not already done so, assign a static IP address to your PC from the same subnet
as the switch; otherwise, the web browser cannot establish a connection with the switch.
11