Cisco Catalyst 3750G Getting Started Manual page 14

Click Next. The Management Interface Configuration page appears.
Step 12
Enter the VLAN identifier zero (0) if the VLAN ID set on the switch management interface
Step 13
is 1. If you entered a VLAN ID other than 1 on the switch management interface (see Step
12 of the Running Express Setup section), enter the same VLAN ID for the controller.
Enter the IP address, the netmask, and the gateway for the management interface.
The management interface is the default interface for in-band management of the
controller and for connectivity to enterprise services such as authentication, authorization,
and accounting (AAA) servers.
Step 14 Enter the IP addresses of the primary and the optional secondary DHCP servers that
supply IP addresses to clients, the controller management interface, and, optionally, the
service-port interface.
14