Table of Contents
Advertisement
Displaying i ages on a TV
Imagesinyourcamera can easily b e displayed a s a slideshow
on almost any TV (tdevision).
NOTE If you are using the HP 8886 camera dock to do this
task, see the HP 8886 C_mero Dock User's Manual.
To connect the camera directly to a TV, you need an A/V
(Audio/Video)
cable. The A/V cable is included in the
HP 8886 camera dock kit, or may be purchased separately
(see Purchasing c amera accessories on page 102).
2 Your camera will send either an NTSC or PAL video signal
to a TV. The NTSC format is used primarily in North
America and Japan, while the PALformat is used primarily
in Europe. This setting is done for you when you set the
language of the camera. If you want to change the video
signal format, change the TV Configuration setting inthe
Setup menu. SeeTV configuration on page 70.
3 Your camera will be the source for the TV signal (just like a
VCR or a camcorder), so you must set the TV to take video
input from an external video source (your camera) instead
of the antenna or cable TV. Referto the TV user's manual for
directions on how to do this.
4 Turn on the camera, then
connect the A/V cable to the
A/V inputs on the TV and to
the TV connector on your
camera.
Chapter 5: Unloading, printing, and displaying images
65
Advertisement
Table of Contents
