Changing Capture Modes - HP 730 User Manual

Changing capture modes
The Male button on the top of the camera sets the camera to
one of nine different capture modes. Each time you press the
M_de button, the camera changes to the next capture mode.
The sequence for the different settings is: Normal, Sdf_Timer,
Bur#, Macro, Adion, Landscapo, ?orfra#, F2_6,F4_9,and then
repeat.
NOTE Thesesettings do not have any effect on recording
video clips unless specifically noted otherwise.
Each time you change the capture mode, an icon representing
that capture mode appears in the Status LCD. If Livo Viow is on,
the icon also appears in the Image Display. The following table
describes these different icons.
Camera automatically sdects focus,
aperture and shutter speed. This is the
default settingwhen the camera is first
turned on.
Stir:Timer Camera waits 10 secondsafter the Video
button or Shunt button is pressedto take a
video clip or a picture. SeeUsin9 stir-timer
mode on page 35.
::Burst Camera quickly takes multiple still pictures
(as long as the Shu_lerbutton is hen down).
See Using burst mode on page 36.
iMacro Camera takes extreme close-up pictures.
Chapter 2: Taking pictures and recording video clips 33