Download  Print this page

Selecting Properties Of The Stack - HP 50g User Manual

Graphing calculator.
Hide thumbs

Advertisement

Selecting properties of the Stack

First, press the H button to activate the CALCULATOR MODES input
form. Within the CALCULATOR MODES input form, press the @@DISP@ soft
menu key (D) to display the DISPLAY MODES input form. Press the
down arrow key, ˜, twice, to get to the Stack line. This line shows two
properties that can be modified.
(checked) the following effects are activated:
_Small
Changes font size to small. This maximizes the amount of
information displayed on the screen. Note, this selection
overrides the font selection for the stack display.
_Textbook
Displays mathematical expressions in graphical
mathematical notation
To illustrate these settings, either in algebraic or RPN mode, use the
equation writer to type the following definite integral:
‚O...Á0™„虄¸\x™x`
In Algebraic mode, the following screen shows the result of these keystrokes
with neither _Small nor _Textbook are selected:
With the _Small option selected only, the display looks as shown below:
With the _Textbook option selected (default value), regardless of whether
the _Small option is selected or not, the display shows the following result:
Page 1-19
When these properties are selected

Advertisement

Table of Contents

   Also See for HP HP 50g

   Related Manuals for HP HP 50g

This manual is also suitable for:

F2229aa - 50g graphing calculator

Comments to this Manuals

Symbols: 0
Latest comments: