Press B to select the MEMORY soft menu () @ @MEM@@). The display now
Press E to select the DIRECTORY soft menu () @ @DIR@@)
The ORDER command is not shown in this screen. To find it we use the L
key to find it:
To activate the ORDER command we press the C(@ORDER) soft menu key.
NOTE: most of the examples in this user manual assume that the
current setting of flag 117 is its default setting (that is, not set). If you
have set the flag but want to strictly follow the examples in this manual,
you should clear the flag before continuing.
For additional information on entering and manipulating expressions in the
display or in the Equation Writer see Chapter 2 of the calculator's user's
guide. For CAS (Computer Algebraic System) settings, see Appendix C in
the calculator's user's guide. For information on Flags see, Chapter 24 in
the calculator's user's guide.