Marantz SR6008 Owner's Manual page 220

Contents Connections Playback Settings Tips Appendix
z1 This item can be selected when a Dolby TrueHD signal is played.
z2 This item can be selected when a Dolby Digital or DTS signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains "+PLgz".
z5 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z6 This setting is available when "Subwoofer Mode" (vpage 177) in the menu is set to "LFE+Main".
z7 This item cannot be set when "Dynamic EQ" (vpage 149) is set to "On".
z8 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when "MultEQ® XT" (vpage 149) is set to "Off" or "Graphic EQ".
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
220
Front panel Display Rear panel Remote Index