Marantz SR6008 Owner's Manual page 108

Contents
Direct playback
Sound recorded in source is played as is.
1
Press PURE to select "DIRECT".
Direct playback begins.
%
• While DSD signals are played back, "DSD DIRECT" is displayed.
• This can be set by pressing PURE DIRECT on the main unit.
Front panel Display
Connections Playback
Rear panel
Settings
Pure Direct playback
This mode is for playback with higher sound quality than in "DIRECT"
mode, by turning off the front panel display panel, which can eliminate
faint low level noise from creeping into sensitive analog circuitry.
1
Press PURE to select "PURE DIRECT".
The display goes dark, and Pure Direct playback begins.
The PURE DIRECT indicator lights.
%
• In DIRECT and PURE DIRECT sound modes, the following items cannot be
adjusted.
• Tone (vpage 147)
• M-DAX (vpage 147)
• MultEQ® XT (vpage 149)
• Dynamic EQ (vpage 149)
• Dynamic Volume (vpage 150)
• This can be set by pressing PURE DIRECT on the main unit.
NOTE
• Video signals are only output when HDMI signals are played in the PURE DIRECT
mode.
• When the PURE DIRECT mode has been selected, the display turns off after about
5 seconds.
108
Remote
Tips Appendix
Index