Unpacking, Transport, Universal Stand And Assembly Unpacking; Contents; Transport - MK Diamond Products MK-170 SERIES Owner's Manual & Operating Instructions

UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNPACKING:
Your MK-170 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.
Use proper lifting techniques when lifting the MK-170.
If not done, remove the MK-170, accessory box from the carton.

CONTENTS:

In your container, you will find one (1) MK-170 cutting surface, one (1) MK-170 water pan, (1) adjustable
cutting guide, (1) 7-inch wet cutting continuous rim diamond blade, one (1) splash guard, one (1) splash guard
washer, one (1) splash guard wing nut, one (1) electric water pump, one (1) pump discharge fitting, one (1)
blade wrench one (1) shaft wrench, one (1) owners manual, one (1) pump manual and one (1) warranty card.
MK-170 Cutting
Surface
Splash Guard
Washer
Shaft
Wrench

TRANSPORT:

1. The MK-170 weighs approximately fifteen (15) pounds for ease of transport.
2. Never transport the MK-170 with water in the Water Pan.
To lift the saw, grasp the Water Pan on either side and lift.
Lift Point
MK-170
MK-170
Water Pan Cutting Guide
Splash Guard
Wing nut Water Pump
Owners
Manual
Revision 02/02, Effective Date February 11, 2002
Adjustable Diamond Blade
Electric
Discharge Fitting
Pump Warranty
Manual
Splash
Guard
Pump Blade Nut
Wrench
Card
Lift Point
Page 11