Sound Adjustment; Other Features Settings - Toshiba 23PB200 Series Owner's Manual

Sound adjustment

Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
• Use the menu: SOUND
• Use the item: MTS
Note:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then switch g to e Mono
(monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
• Use the menu: SOUND
• Use the item: Dual
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
When a stereo programme is received, d Stereo
appears and press g.
• Use modes: Stereo and Mono
Selecting the bilingual programmes
When a bilingual programme is received, j Dual
appears and press g.
Display
NICAM
Sub I sound
j Dual 1
Sub II sound
J Dual 2
e Mono
Main sound
Note:
These settings are not stored in the TV memory.
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
When a monaural programme is received, e Mono
appears and press g.
• Use modes: Mono 1 and Mono 2
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
Adjusting the sound quality
You can adjust the basic sound quality.
• Use the menu: SOUND
• Use items: Bass, Treble and Balance
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
• Use menus: SOUND and Power Bass Booster
• Use items: Super, Normal and Off
Using the Audio Level Off set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
diff erences.
• Use the menu: SOUND
• Use the item: Audio Level Off set
• Use the button:  and 

Other features settings

Selecting the TIMER menu
The Timer is especially useful if you want the TV to
turn itself on or off after a selected period of time.
• Use the menu: TIMER
• Use items: Sleep Timer, On Timer and On Timer
Position
• Use the button: Number buttons (0-9),  and 
Notes:
• When setting the On timer, press  or  to select
the On Timer Position and enter the program
position number you want to watch. Press EXIT to
exit the menu. Set the Standby mode by pressing
on the remote control.
• The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
– 15 –