Teletext - Toshiba 23PB200 Series Owner's Manual

Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV's previous setting.
• Use the menu: FUNCTION
• Use the item: Auto Format
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted when no signal is being received.
• Use the menu: FUNCTION
• Use the item: Blue Screen
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you don't touch the
control buttons on the remote control or on the TV
control panel.
• Use the menu: FUNCTION
• Use the item: Automatic Power Down
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
• Use the menu: FUNCTION
• Use the item: Panel Lock
Note:
When Panel Lock is On, a reminder will appear when
the buttons on the TV are pressed.
If the standby button is pressed, the TV will switch off
and can only be brought out of standby by using the
remote control.
Activating the 4:3 Stretch
When 4:3 Stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
• Use the menu: FUNCTION
• Use the item: 4:3 Stretch
Note:
In HDMI signal format, this function is available.

Teletext

This TV has a multi-page Teletext memory, which
takes a few moments to load and it off ers two
ways of viewing Teletext Auto and List which are
explained below.
Setting up the Teletext mode
To select a language for Teletext:
The language 1-4 option enables the display of
diff erent language when using Teletext.
• Use the menu: FUNCTION
• Use the item: Teletext Language
Language 1: English, German, Dutch, Flemish,
Russian, Bulgarian, Ukranian, Lettish, Lithuanian,
Czech, Slovak, Estonian
Language 2: Polish, German, Dutch, Flemish,
Estonian, Lettish, Lithuanian, French, Serbian,
Croatian, Slovenian, Czech, Slovak, Rumanian
Language 3: English, French, Hebrew, Turkish,
Arabic
Language 4: English, French, Hebrew, Turkish,
Farsi (Iranian/Persian)
To select Teletext mode:
Select a channel position with the desired Teletext
service.
• Use the menu: FUNCTION
• Use the item: Teletext
• Use modes: Auto and List
Teletext general information
button
Pressing once will bring up the teletext
screen. Press again to superimpose the teletext over
a normal broadcast picture. Press again to return
to normal TV mode. You need to return to normal
viewing if you wish to change channels.
When you fi rst press
the fi rst page you see will be the initial page.
In Auto mode, this displays the main subjects
available and their relevant page numbers.
In List mode, you will see the page numbers
currently stored on the each colour button.
Sub-pages:
Once in this chosen page, if there are sub-pages
they will automatically load into memory without
changing the one you are reading. If there are many
sub-pages, it will take a long time for them all to
load and this will depend on the speed with which
the broadcaster transmits them.
To access the sub-pages in memory, press  or 
to view them.
– 16 –
to access the text service,