Check The Saved Items; Load A Control Set - Sanyo PLV-80 Series Owner's Manual

Chapter 4 Controlling the Projector

Check the saved items

Click Check button to check the current setting condition of the controls. Each item of "PC
adj.", "Control" and "Setting" is displayed sequentially.

Load a control set

S e l e c t y o u r d e s i r e d s e t n u m b e r
(Totalsave1 to Totalsave10) with the pull-
down menu button of Load Set and then
click Load button. The setting values of
the selected set number are applied to
the current settings.
✐ If the contents of the saved set are not matched for the inputs equipped on the projector, the
invalid alert message may be displayed.

Click Stop button to cancel
the auto page display.
Select a set
number