Pc Adjustment - Sanyo PLV-80 Series Owner's Manual

Chapter 4 Controlling the Projector

PC adjustment

Click PC Adj. on the main menu. This function is to adjust the signal from
the computer connected to the projector to obtain the proper picture
image on the screen.
Up to 60 characters can be used for
the Memo of ExMode11 to ExMode50.

✐ The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode10 are stored into
the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.
Item Description
Current mode ...... Displays a current mode like VGA, SVGA, XGA. SXGA,
UXGA, WXGA, etc. or MODE1 - MODE10, EXT11 -
EXT50 which are the customized mode created by
using the "Mode Store" function described below.
EXT51 - EXT60 represents mode Totalsave1 -
Totalsave10 used in the item "Save" (+p.51).
Auto PC adj.......... Performs automatic adjustment.
Fine sync. .............. Performs Fine Sync adjustment. (0 ~ 31)
Total dots .............. Adjust the number of total dots in the horizontal
period.
Clamp
.........................Adjusts the phase of the clamp. (1 ~ 255)
Display area
H orizontal ..........Adjusts the image area horizontally.
Vertical ..............Adjusts the image area vertically.
Item Description
Position
Horizontal ....... Adjusts the horizontal position of the screen.
Vertical ..............Adjusts the vertical position of the screen.
Reset......................... Resets the PC adjustments to the previous levels.
Mode Store .......... Stores the PC adjustment values. Select a mode
no. [Mode1 - Mode10, ExMode11 - ExMode50]
from the pull-down menu.
Mode Free ............ Clear the PC adjustment values. Select a mode
no. [Mode1 - Mode10, ExMode11 - ExMode50]
from the pull-down menu.