Connecting A Stereo Tv, Vcr And Dvd - Motorola DCT2000 Installation Manual

Connecting a Stereo TV, VCR and DVD

1
Connect an RF coaxial cable between the cable wall outlet and the
CABLE IN connector on the DCT2000.
2
Connect the RF coaxial cable, supplied with the DCT2000,
between the RF IN and TO RF IN connectors on the DCT2000.
3
Connect a RF coaxial cable between the TO TV / VCR connector
on the DCT2000 and the CABLE / ANTENNA IN connector on the
VCR.
4
Connect a RF coaxial cable between the To TV connector on the
VCR and the CABLE / ANTENNA IN connector on the stereo TV.
5
Connect a stereo audio cable between the INPUT AUDIO LEFT
and RIGHT connectors on the stereo TV and the AUDIO OUT
ANALOG R and L connectors on the DVD.
6
Connect a video cable between the INPUT VIDEO connector on
the stereo TV and the VIDEO OUT VIDEO connector on the DVD.
Connect a S-video cable between the INPUT S-VIDEO connector
on the stereo TV and the VIDEO OUT S-VIDEO connector on the
DVD.
This cable configuration may be used for a Mono or Stereo VCR,
because the VCR audio and video jacks are not used.
DCT2000s with the Home Theater option offer S-Video, an output that
may provide a higher level of picture quality. If your components offer S-
Video connections, they may be used in place of RCA video
connections.
OR
3 1