Connecting A Tv, Stereo Vcr, Dvd And Stereo Receiver Or Amplifier - Motorola DCT2000 Installation Manual

Connecting a TV, Stereo VCR, DVD and
Stereo Receiver or Amplifier
1
Connect an RF coaxial cable between the cable wall outlet and the
CABLE IN connector on the DCT2000.
2
Connect the RF coaxial cable, supplied with the DCT2000,
between the RF IN and TO RF IN connectors on the DCT2000.
3
Connect a RF coaxial cable between the TO TV / VCR connector
on the DCT2000 and the CABLE / ANTENNA IN connector on the
stereo VCR.
4
Connect a RF coaxial cable between the To TV connector on the
stereo VCR and the CABLE / ANTENNA IN connector on the TV.
5
Connect a stereo audio cable between the AUDIO OUT R and L
connectors on the DCT2000 and the AUX IN R and L connectors
on the stereo receiver or amplifier.
6
Connect a video cable between the VIDEO connector on the
DCT2000 and the INPUT VIDEO connector on the stereo VCR.
7
Connect a stereo audio cable between the INPUT AUDIO R and L
connectors on the stereo VCR and the TAPE 1 OUT R and L
connectors on the stereo receiver or amplifier.
8
Connect a stereo audio cable between the OUTPUT AUDIO R and
L connectors on the stereo VCR and the TAPE 1 IN R and L
connectors on the stereo receiver or amplifier.
9
Connect a stereo audio cable between the CD IN R and L
connectors on the stereo receiver or amplifier and the AUDIO OUT
ANALOG R and L connectors on the DVD.
10
Connect a video cable between the VIDEO OUT VIDEO connector
on the DVD and the INPUT VIDEO connector on the TV.
This cable configuration may be used for a mono or stereo TV, because
the TV audio and video jacks are not used.
To watch TV or view VCR recordings, the TV must be tuned to the
DCT2000 and VCR output channel, typically 3 or 4.
To watch a DVD, the TV line input must be used.
DCT2000s with the Home Theater option offer S-Video, an output that
may provide a higher level of picture quality. If your components offer
S-Video connections, they may be used in place of RCA video
connections.
3 5