Connecting A Mono Tv, Vcr And Dvd - Motorola DCT2000 Installation Manual

Connecting a Mono TV, VCR and DVD

1
Connect an RF coaxial cable between the cable wall outlet and the
CABLE IN connector on the DCT2000.
2
Connect the RF coaxial cable, supplied with the DCT2000,
between the RF IN and TO RF IN connectors on the DCT2000.
3
Connect a RF coaxial cable between the TO TV / VCR connector
on the DCT2000 and the CABLE / ANTENNA IN connector on the
VCR.
4
Connect a RF coaxial cable between the To TV connector on the
VCR and the CABLE / ANTENNA IN connector on the mono TV.
5
Connect a stereo audio cable with a Y- adapter between the
AUDIO OUT ANALOG R and L connectors on the DVD and the
INPUT AUDIO connector on the mono TV.
6
Connect a video cable between the VIDEO OUT VIDEO connector
on the DVD and the INPUT VIDEO connector on the mono TV.
This cable configuration may be used for a mono or stereo VCR,
because the VCR audio jacks are not used.
2 9