Charging Mode Setting - Pioneer SGX-CA500 User Manual

Cyclocomputer
Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Charging Mode Setting

You can change the charging mode of the device. Using
boost charge reduces battery charging time.
You should normally use the [Normal Charge].
Using boost charge needs output current of 1A. Make sure
the output current you use is more than 1A.
The charging mode automatically changes to Boost Charge
when the device detects an AC adapter which provides
output current of 1A.
Boost Charge changes to Normal Charge by disconnecting
the device from the AC adapter. It is necessary to specify
the charging mode every time after you connect the device
to the AC adapter.
1
Connect the device to the AC adapter.
Connect the provided USB cable to an AC adapter of
which output current is more than 1A.
For information about connections, refer to "Charging the
Device" under "Charging" (
2
On the home screen, tap the [Settings] icon.
This displays the settings menu.
3
Tap [System] - [Battery].
This displays the remaining battery charge and the
current charging mode setting.
4
Tap [Charge Mode] - [Boost Charge].
This sets the charging mode setting.
page 6).
Charging
EN
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents