Transferring The Data; Backing Up Log Data To A Pc; Log Data Upload To The Analysis Service - Pioneer SGX-CA500 User Manual

Cyclocomputer
Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Transferring the Data

EN

Backing up Log Data to a PC

You can transfer the log data in the built-in flash memory of
the device to your PC.
Transferred data can be analyzed using the Pioneer™
Cyclo-Sphere web service.
1
Connect the device to your PC with the
provided USB cable.
The PC will recognize the device as a mass storage
device.
For information about connecting the device to a PC, refer
to "Charging the Device" under "Charging" (
2
Select the data you want to transfer, and then
save it anywhere on the PC.
The log data is saved in the "\Pioneer\ Log" folder.
Save it anywhere on the PC.
The file name is the date and hour that the training log
started.
(Example: LOG_2013_04_01_08_20.db)
26
Log Data Upload to the Analysis
Service
The log data in the device can be uploaded to the Cyclo-
Sphere analysis website in the following two ways.
Uploading the data via "Pioneer Cycle Cloud Connect" by
connecting the device to a PC.
Uploading Log Data with a PC (page 26)
Uploading the data via Wi-Fi by using the application on
the device.
Wi-Fi LogUp (page 40)
page 6).
The device's Wi-Fi settings must be done to upload the log
data via Wi-Fi.
Uploading Log Data with a PC
If "Pioneer Cycle Cloud Connect" application is installed on
your PC, the log data in the device's built-in flash memory
will be automatically uploaded to the Cyclo-Sphere analysis
website.
Refer to the support page for instructions on how to install
"Pioneer Cycle Cloud Connect" application to your PC.
[For American Users]
[For Canadian Users (ENGLISH)]
[For Canadian Users (FRENCH)]
[For European Users]
Your PC will need Internet connection to upload your data to
Cyclo-Sphere.
1
Connect the device to your PC with the USB
cable that came with the device.
If the automatic upload of ride log data is set on "Pioneer
Cycle Cloud Connect", Cyclo-Sphere login ID and
password input screens are displayed.
Refer to the "Charging the Device" under "Charging"
(
2
Input the login ID and password.
The log data upload is started automatically.
New log data not previously uploaded to Cyclo-Sphere will
be uploaded.
Do not disconnect the device and the PC during upload.
3
Disconnect your device from your PC after the
upload is completed.
Wi-Fi Settings (page 44)
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca/POCEN/Support
http://www.pioneerelectronics.ca/POCFR/Soutien
http://www.pioneer.eu/eur/support/page.html
page 6) for connecting the device to a PC.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents