Workout; Basic Workout Flow; Basic Flow Of The Workout; Logging Start/Stop - Pioneer SGX-CA500 User Manual

Cyclocomputer
Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Basic Workout Flow

EN
This device is designed to log a variety of sensor data as well as GPS location data during your workout. In this device, the
beginning of the training to the end of the training is called " workout".

Basic Flow of the Workout

Lap1
[Start]

Logging Start/Stop

1
Press the [START/STOP] button to start
logging.
[Timer Started] is displayed.
2
Press the [START/STOP] button to stop logging.
[Timer Stopped] is displayed.
You can start and stop logging at any time while the device
is turned on except while the device is connected to a PC or
during setting initialization.
A logging operation can continue for up to 360,000 points.
If the [LAP] button is pressed during logging, a lap is
recorded. Up to 300 laps can be recorded during a single
logging operation.
20
Lap2
Lap3
[Lap]
[Lap]
[Stop]

Workout

Lap3
Lap4
[Start]
[Lap]
Logging Interval
Under initial factory default settings, the device is configured
to save various types of data at 1 second intervals when
logging.
You can change settings so the logging interval is to be
adjusted in accordance with bike riding speed.
The logging interval becomes shorter as bike riding speed
increases and longer as riding speed decreases.
Logging (page 45)
Timer
Resetting
Lap5
[Lap]
[Lap]
(2 sec.)
[Stop]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents