Saving A Frame From A Movie As A Still Image - Nikon Coolpix P600 Reference Manual

5
Use HI to select m (Save) and
press the k button.
• Follow the instructions on the screen to save
the movie.
B
Notes About Movie Extracting
• A movie that was created by editing cannot be edited again.
• The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.

Saving a Frame from a Movie as a Still Image

The desired frame of a recorded movie can be extracted and saved as a still
image.
• Pause a movie and display the frame to be
extracted (A94).
• Use the multi selector JK to select the
H control and press the k button.
• Select Yes when a confirmation dialog is
displayed, and press the k button to save the
image.
• The still image is saved with Normal as the
image quality. The image size is determined by
the type (image size) (E54) of the original
movie.
For example, a still image saved from a movie
recorded with e 1080/30p (or p 1080/25p) is i (1920 × 1080
pixels).
E20
Save
5m 52s 5m 52s 5m 52s
Copy this frame as a still image?
Yes
No
7m42s 7m42s 7m42s