Christie Q Series Specifications page 4

Designed for
performance
Blending or
warping capabilities
Blending or warping are easy with the
new Q Series software and the use
of off-the-shelf standard cameras.
The software and camera option allow
for easy and quick edge-blending
capabilities. You can also use the software
to set up multiple projectors for warping
images (advanced geometry correction)
or for multi projector blending to create
large panoramic seamless display.
Broad variety of lensing options
New lens shift capability with our ultra-
short throw lenses allows you to install
projectors as close as necessary to your
projected image without compromising
display size.
Multiple screens, or creative projection
on multiple areas, are not a problem with
up to three memory settings for lens shift,
zoom and focus recalls.
1 Logitech : HD Pro Webcam C910 / HD Pro Webcam C920; Canon Digital SLR: T1i / T2i / T3 / T3i.
2 Simulation mode is for training purposes only, not for medical diagnostics of actual patients.
3
360 degree projection
Portrait mode and
360 degree projection
Projectors can be used in portrait
orientation using existing lamps, reducing
your set-up time and minimizing extra
1
costs for special lamps. They can also be
installed in a 360 degree configuration.
Enhanced lamp options
Dual-lamp design lets you maximize
brightness or extend lamp life. Lamps
can be used in relay, eco, auto backup
and balance mode. Lamp life is up to
2000 hours for standard mode, up to
4000 hours for eco 2-lamp and up to
8000 hours in optional lamp relay
modes. The lamps are also designed
to be swapped out without shutting
down the projector.
Connectivity
HDBaseT provides the latest in
intelligent and flexible connectivity,
simplifying installation and management
by allowing for video content, audio
and control to be delivered over low
cost CAT5/6e cabling to HDBaseT-
compatible products.
Standard mode DICOM simulation mode
Digital Imaging and Communication
in Medical (DICOM) simulation
DICOM simulation mode provides
enhanced grey scale levels for medical
training applications requiring DICOM
2
part 14 specifications.
Built-in LCD information display
The LCD display gives you real-time
diagnostic information, assisting
in network setup or helping with
troubleshooting. Examples of
some display options:
Lamp time
Filter hours
Projector usage
IP address