TP-Link TL-WA5210G User Manual page 79

SSID (Set Service Identifier) - Identifies your wireless network name. Create a name up to 32
characters and make sure all wireless points in the wireless network with the same SSID.
The default SSID is TP-LINK_XXXXXX (XXXXXX indicates the last unique six characters of
each device's MAC address). This value is case-sensitive. For example, TEST is NOT the
same as test.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region is
not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the Note
Dialog appears. Click OK.
Note:
Limited by local law regulations, version for North America does not have region selection
option.
Channel - Determines the operating frequency to be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
Mode - Select the desired wireless mode. The options are:
•
54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
router.
•
11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.
Be sure to click the Save button to save your settings on this page.
Note:
The device will reboot automatically after you click the Save button.
Figure 5-5 Wireless Settings in AP mode
Note Dialog
71