TP-Link TL-WA5210G User Manual page 19

Note:
The IP parameters should have been provided by your ISP.
IP Address - This is the WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
Default Gateway - Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the boxes if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
3. After you complete the above, click Next, the Wireless settings page will appear below.
On this page, you can configure the following wireless parameters:
Note:
The Quick Setup - Wireless page differs in different modes. If you choose the AP Router mode,
you will see the Wireless page as below.
Figure 3-9 Quick Setup - Static IP
Figure 3-10 Quick Setup - Wireless settings
11