Pyrolytic Cleaning - Westinghouse POP663 User Manual

Removing and replacing the catalytic fan baffle (where fitted)
CAUTION
The oven must be switched off before removing the fan
baffle, and the fan baffle must be replaced in accordance
with instructions.
• R emove the 2 retaining screws on the top edge of
the fan baffle.
• P ull the top edge towards you and then disengage
to bottom tabs from the oven back.
TIPS & INFORMATION
Note: The fan baffle must be replaced after cleaning.
• I nsert the two tabs at the bottom of the fan baffle
into their corresponding slots in the oven back.
• P ush the top home and insert screws firmly into
appropriate holes.
• T he fan baffle must not be loose. The fan baffle
must be flush with the back wall of the oven.
PYROLYTIC CLEANING OF THE OvEN CAvITY
(POP883 MODEL ONLY)
Operation
If your oven has the Pyrolytic self-cleaning function, it cleans
by burning off the spatters and accumulated dirt and grease
from the oven liner, at high temperature. This process produces
ash which can then be wiped out of the oven cavity.
CAUTION
During the pyrolytic cleaning process the oven becomes
very hot (approximately 500˚C).
• Please keep small children at a safe distance
• D uring pyrolytic cleaning the air outlet vent above the door
must be kept clear of any obstruction (eg bulky tea towels).
• I t is recommended you clean your oven regularly to
keep the oven in its best condition.
• D o not use your oven to clean miscellaneous items
(eg cookware).
Before carrying out the Pyro function,
All accessories must be removed from the oven. This includes
shelves, trays and side racks. Clean large pieces of dirt or
grease from the oven liner.
There are 2 Pyro cleaning cycles you can use.
SOILING DURATION
Light clean 2hrs 00min
Normal clean 2hrs 30min
Duration includes heat-up time and cool-down time for the oven.
• Light clean
This is an energy saving cycle that can be used on a
regular basis if your oven is lightly soiled. Possibly after
every 2nd or 3rd time you roast meat.
• Normal clean
u se this as your regular cycle about once every
2-3 months to clean your oven.
Starting the Pyro clean function
1. Switch on the appliance by pressing "On/Off".
2. Press "Function" as many times as necessary until the
word "P1" is displayed.
3. P ress "+" or "–" to choose 2hrs 00min or 2hrs 30min
for the appropriate level of cleaning.
4. P ress Pyro Accept to commence the cleaning process.
TIPS & INFORMATION
During Pyro cleaning the door will automatically lock when
the temperature in the oven approaches 300˚C. (A key symbol
will appear on the display.) The door will only unlock when
the oven has cooled to a safe temperature. Turning the
function off will not unlock the door. This will only happen
when safe temperatures are reached.
Note: The cooling fan will operate at an increased speed
for Pyro cleaning and will continue to run until the oven has
cooled down. This is normal.
After Pyro cleaning
After cool-down you can wipe the ash out of the oven
with a soft damp cloth and warm water.
To restore the enamel shine to more difficult areas,
use a damp cloth with white vinegar and detergent.
27