Functions - Toshiba Teli CSGV90BC3 Instruction Manual

7. Functions

Control and setting of functions can be done by the camera control based on the Gigabit Ethernet digital camera
protocol (GigEVision Ver.1.00).
(1) Image output
A format of the output image and frame rate which this GiantDragon B/W series supports is as follows.
Model
Image output format
Frame rate
(at the all pixel readout)
Notes on Frame Drops of Image:
- Depends on your PC or Gigabit Ethernet interface board configurations, images may not be
captured normally (e.g. frame drops may occur). In this case, change to frame rate setting
lower.
(2) Setup-level setting
You can set the Setup-level in 192 steps in the range between 6.3 and 25%.
(3) Gain setting
When shipping it, the gain is set to 0dB. You can set the gain in 91 steps in the range between 0 and +12dB.
(4) Binning mode
This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.
Binning mode
Readout vertical line number
Maximum frame rate
(5) Image resending control
As the resending control of the image, this camera resends the packet which suffered a loss.
CSGV90BC3 CSGX36BC3
GVSP_PIX_MONO10:Mono 10 bit
Maximum Maximum
90fps 36fps
CSGV90BC3 CSGX36BC3
1/2
240
170fps 64 fps
CSGS20BC2
GVSP_PIX_MONO8: Mono 8 bit
Maximum
20fps
CSGS20BC2
1/2 1/2
384 480
34fps
5
CSGU15BC18 CSGS15BC23
Maximum Maximum
15fps 15fps
CSGU15BC18 CSGS15BC23
1/4
300
46fps
1/2
512
32fps
D4153659A