TC Electronic Studio Konnekt 48 User Manual page 30

INTEGRATOR
Integrating external hardware with your DAW
Let us take at closer look at the integration of the Reverb 4000 from the setup example on page 24.
MIC1 USER 1
CH5/6 USER 4
P1
MIC
PANEL
M.MIX
MASTER
STUDIO CONTROL
REVERB 4000
The example shows how Studio Konnekt 48 and the
Integrator plug-in allow integration of external digital
effects devices with your DAW.
Connections:
• Reverb 4000 is connected via S/PDIF coax 1/2 on
Studio Konnekt 48
• Studio Konnekt 48 is connected to your computer via
FireWire
28
DAW COMPUTER
WITH FIREWIRE
FIREWIRE
channel 1 preamp channel 2 preamp
OFF -20dB OFF
studiokontrol
MIC2 USER 2 SPDIF USER 3 PAD PAD
CH7/8 USER 5 DAW USER 6
P2 P3
PROG
(P1-P3) CAT 5
min max
mic/inst input
mic/inst input
gain trim
IMPACT II TM technology IMPACT II TM technology
AUX1 EFFECT AUX2 TALK TUNER
A CH on/off B SHIFT C
ANALOG FILTER
LEFT
SUB
channel 3 preamp channel 4 preamp phones 1 phones 2 master level
48V
ADAT SPDIF TOS MIDI FireWire valid
-20dB OFF -20dB OFF -20dB 1-8 1-2 1-2 3-4 IN OUT
PAD PAD
OFF ON
O
-3
-6
-12
-24
min max
min max min max min max -40
1 2 3 4 5/6 7/8 9/10 11/12 dB
mic/inst input mic/inst input output studiokonnekt 48
gain trim gain trim gain trim (ch3-4) (ch11-12)
IMPACT II TM technology IMPACT II TM technology
IN OUT
Objects:
Reverb 4000 is an excellent reverb and we intend to use
this as a send effect in our DAW.
Please refer to the reference manual for your DAW for
detailed information about setting up send effects.
For each external effect, one instance of the Integrator
plug-in must be set up. Each of the Integrator instances
then represents one external effect.
RIGHT
power