Technical Data; Installation - Zanussi ZFU25200WA User Manual

Technical data

Dimension
Rising Time
Voltage
Frequency
The technical information are situated in the rat-
ing plate on the internal left side of the appli-
ance and in the energy label.

Installation

Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Location
The appliance should be installed well away
from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate
freely around the back of the cabinet. To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and
the wall unit must be at least 100 mm . Ideally,
however, the appliance should not be posi-
tioned below overhanging wall units. Accurate
10
Height
Width
Depth
levelling is ensured by one or more adjustable
feet at the base of the cabinet.
power supply; the plug must therefore be easily
accessible after installation.
Electrical Connection
by a qualified electrician or competent person.
1850 mm
600 mm
660 mm
15 h
230 - 240 V
50 Hz
Warning! It must be possible to
disconnect the appliance from the mains
A
Caution! Any electrical work required to
install this appliance should be carried out
B
www.zanussi.com